Common faults and troubleshooting methods of LED mobile lighting vehicles
LED mobile lighting vehicles are mainly used for railway lines, power engineering, public security organs, fire safety, highway tunnels, tunnel construction and other outdoor engineering construction work, maintenance and repair, accident handling and emergency rescue work on-site for large-scale, high-brightness lighting need. Various problems usually occur in the actual operation of engineering construction, and then I will give you a specific analysis of the common problems of LED mobile lighting vehicles and the troubleshooting methods of various problems.
1. The engine does not start
Initially check whether there is fuel in the fuel tank? If not, please add fuel and check whether the engine switch is accepted? If not, accept the engine switch. Check whether the oil is present? Add engine oil if insufficient. Check whether the spark plug is good? If not, remove it, adjust and adjust the spark plug and install it back, and replace the spark plug if necessary. If it still does not start, report it to our company, and the company's specialized professional and technical personnel will inspect and repair it.
2. No voltage output
Initially check whether the AC circuit breaker has received it? If not, connect the AC circuit breaker. Check whether there is a problem with the load electrical appliance. If there is a problem, replace the equipment or overhaul. If there is still no voltage output, inform our company. Overhauled by our company's specialized professional and technical personnel.
