Jun 10, 2020 Leave a message

Analysis Of The Performance Characteristics And Applications Of Engineering Lighting Units

Analysis of the performance characteristics and applications of engineering lighting units


[Reflective design] 1: According to the use of the lighting system, a type of spotlighting near-projection large-area lighting is required. We have designed a condensing reflector according to this need, and the lamp has a dispersion angle of 180°C. 2: In order to make the lighting efficiency higher, we chose the American high-bright reflective material in the reflector material. After punching, we can directly use the 300℃ high temperature without deformation, and the color change has good reflective performance.

 

【Glass selection】Using special tempered glass, light transmittance is twice that of ordinary glass, high temperature resistance is not easy to break.

 

[Elevation function] The telescopic gas rod is used as a lifting adjustment method. The maximum lifting height of the lighting system is 4.5 meters. The cross-sectional shape of the gas rod is specially designed. It has good guiding performance, high rigidity, stable operation and no rotation; high strength oxidation treatment on the surface of the gas rod. Wear-resistant and corrosion-resistant, long service life, light weight, easy to carry.

 

[Illumination system] It consists of four lamp heads on the lamp panel, and the lamp tubes are four 500W gold halogen lamps, which have good light gathering effect. The luminous flux of a single tube is 10000lm, and the service life is more than 10000 hours. According to the needs of the scene, each lamp head can be individually adjusted for up, down, left, and right angles, and rotated to achieve 360° omnidirectional lighting in any direction; the lamp panel can be rotated vertically and horizontally.

 

[Selection of light source] Due to the consideration of lighting to work better, the light source needs high light efficiency and long life. We mainly use gold halogen bulbs. The advantages of the light source are: 1: The color temperature of the lamp light source is 4500K. Close to daylight. 2: The gas discharge bulb has no filament, and the new technology has a high degree of shock resistance. 3: The lamp life is up to 10000 hours.

 

[Customized for you] In order to meet the personalized needs of users, if the standard configuration of this product cannot meet the user's work needs, our company can raise the number of lamp heads, power, flood or spotlight types, and telescopic gas rods The height and power of the generator are adjusted according to user requirements.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry